Souvenir / Fridge Magnet Display

PARTS INCLUDED: 

1. Main base (base + 6 magnet bases) x 1

2: Magnet base x 29 

3. Connecting rod x 72

4. Clip-on base x 10

5. Base spacer x 3

6. Hex Allen key x 3

7. Screw x 3

8. Wall plug x 3

9. Connecting rod with clip-on base x 30

10. Sticky magnet x 10 (not in picture)

SETTING UP INSTRUCTIONS:

Fixing main base to the wall 

Top two magnet base needs to be in a horizontal line.

Use screws to fix main base to supporting wall. 

Add connecting rod to magnet base.

IMPORTANT: Turn screw clockwise around between 2 to 3 times from surface level. Pull out rod gently to check if it is secured. If rod is coming out, turn screw for another half a turn and check again if it is secured.

Add magnet base to connecting rod using the Allen key. 

IMPORTANT: Turn screw clockwise around between 2 to 3 times from surface level. Pull out magnet base gently to check if it is secured. If it is coming out, turn screw for another half a turn and check again if it is secured.

Use a base spacer to get uniform distance between two magnet bases.

Secure magnet base to other end of connecting rod.

IMPORTANT: Turn screw clockwise around between 2 to 3 times from surface level. Pull out magnet base gently to check if it is secured. If it is coming out, turn screw for another half a turn and check again if it is secured.

Adding a magnet base to 3 connecting rods

TIPS

Connect a new base to at least two connecting rods.

Use a blanket on the floor to protect fridge magnet from falls if there is any accident.

Use sticky magnets to increase magnetic strength of weak fridge magnet attraction.

CAUTION

1. Add fridge magnet carefully to steel plate. Feel if the connection is strong enough to hold fridge magnet in place.

2. Use sticky magnets to increase magnetic strength of Fridge magnets or add to Fridge magnets where their magnets is not central.

3. Use a blanket on the floor to protect fridge magnet from falls if there is any accident when expanding display and adding new fridge magnets.

4,. When adding or removing a magnet base, remove fridge magnets from magnet bases or mini bases in the vicinity to user accidentally knocking them off the steel plate.

5. Turning the magnet base screw more than required 2-3 turn will push the screw inside the connecting rod. This can damage the connecting rod for continue use.

6. Wall protector pads to protect your wall from contact with the display.